Model NO.: Geomembrane
Surface: Smooth Material: HDPE Length: 100m Sample: Free Usage: Waterproof Material Other Name: Hdpe Geomembrane
Transport Package: Each Roll Is Wrapped with a Woven Bag
with Origin: Made in China Certification: CE, ISO Application: Transportation Project, Hydraulic Project, Insulation, Waterproof, Water Filter Color: White Width: 7m Thickness: 0.2-1cm Production Standards: ASTM Standards Trademark: OEM Specification: from 80g/m2 to 1200g/m2 HS Code: 3926909090 HDPE geomembrane and welding machine with cheap price
Widely use in water reservoirs, pond-lining, landfill lining, irrigation canals, tunnels, underground insulation, mining, tanks, construction projects, insulation buildings, aquaculture, etc.
|NO. ||Items ||Value |
|General ||Environmental |
|1 ||Thickness mm ||0.2~4 |
|2 ||Width m ||2.5~8 |
|3 ||Tensile Strength(TD/MD)MPa ||≥17 ||≥25 |
|4 ||Elongation at Break(TD/MD)% ||≥450 ||≥550 |
|5 ||Strength at Tear(Right-angle Tear)N/mm ||≥80 ||≥110 |
|6 ||Carbon black content% ||2.0-3.0 ||2.0-3.0 |
|7 ||Anti-crack F20,H || ||≥1500 |
|8 ||-70Low Temperature ImpactBrittle propery || ||pass |
|9 ||Oxidative Inducement Time at 200°C,min || ||≥20 |
Introduction of Geomembrane
Geomembrane is a kind of impervious material which is made up of plastic film as impervious material and non-woven fabric. The anti-seepage performance of the new material geomembrane is mainly determined by the permeability of plastic film. At present, the domestic and foreign application of impervious plastic film, mainly polyvinyl chloride (PVC) and polyethylene (PE), EVA (ethylene / vinyl acetate copolymer), using the ECB design and application in tunnel (ethylene vinyl acetate modified asphalt blending geomembrane), which is a kind of high chemical flexible material, a smaller proportion extension, strong adaptability of deformation, high corrosion resistance, low temperature resistance, frost resistance.
Geomembrane is a kind of waterproof barrier material based on polymer. Mainly divided into: low density polyethylene (LDPE) geomembrane, high density polyethylene (HDPE) geomembrane and EVA geomembrane.
1 width and thickness specifications.
2 excellent resistance to environmental stress cracking and excellent chemical corrosion resistance.
3 excellent chemical resistance.
4 has a larger operating temperature range and longer service life.
5 used in landfill, tailings storage, seepage control, seepage control and subway project.
The main mechanism is a plastic film impermeable partition dam Water Leakage channel, with its large tensile strength under pressureadapt to dam deformation; and the non-woven fabric is also a kind of polymer material chemical short fiber, through acupuncture or thermal forming, with tensile strength and elongation is higher, it is combined with after the plastic film, not only increases the tensile strength and puncture resistance of plastic film, non-woven fabric and because rough surface, increases the friction coefficient of the contact surface, in favor of composite geomembrane and protection layer stability. At the same time, they have good corrosion resistance to bacteria and chemical action, not afraid of acid, alkali, salt erosion, in the light of the use of long life.
The properties of HDPE geomembrane are as follows:
1. HDPE geomembrane is a kind of flexible waterproof material, which has a high coefficient of seepage control (1 * 10-17 cm/s);
2, HDPE geomembrane with good heat resistance and cold resistance, the use of the ambient temperature of 110 degrees high temperature, low temperature -70 c;
3, HDPE geotechnical membrane has good chemical stability, corrosion resistance to acid, alkali, oil is good anticorrosive material;
4, HDPE geomembrane with high tensile strength, so that it has a high tensile strength to meet the needs of high standard engineering projects;
5, HDPE geomembrane has a strong weather resistance, has a strong anti-aging performance, can be used for a long time exposed to maintain the original performance;
6, the overall performance of HDPE geomembrane, HDPE geomembrane has a strong tensile strength and elongation at break, so that the HDPE geomembrane can be used in a variety of different geological and climatic conditions. To adapt to the uneven settlement of geological strain;
7, HDPE geomembrane with high quality original plastic and carbon black particles do not contain any preservatives, HDPE has been used in our country to replace PVC as food packaging bags and plastic film raw materials.
1, HDPE geomembrane suitable for environmental protection, sanitation: such as landfill, sewage treatment plant, power plant regulation pool, industrial, hospital solid waste, etc.;
2, LDPE impervious membrane applied to water conservancy project such as seepage, riverslakes reservoir dam reinforcement, plugging, anti-seepage of canal, vertical wall, slope protection;
3, HDPE impervious membrane in Municipal Engineering: subway, building underground engineering, planting roof, Roof garden, sewage pipe seepage control;
4, polyethylene film for Garden: artificial lake, river, reservoir, golf course pond bottom, slope protection and greening lawn waterproof etc.;
5, high density polyethylene geomembrane for petrochemical: chemical plant, refinery, oil tank seepage control, chemical reaction pool, sedimentation tank lining, the two lining, etc.;
6, polyethylene geomembrane for heap leaching mining: washing pool, pool, Ashery, dissolved pool, sedimentation tank, yard, the bottom lining seepage of tailings;
7, low density polyethylene film for transportation facilities: highway foundation reinforcement, culvert seepage control;
8, LDPE impermeable membrane suitable for agriculture: reservoir, drinking water pool, water storage pond, irrigation system seepage control;
9, HDPE film for aquaculture: intensive factory farming, pool, pond, pond liners, sea cucumber ring protection;
10, high density polyethylene film for salt: saltern crystallizer ponds, pond, salt, brine cover film Yanchi plastic tarpaulin film.
Geomembrane in the process of transport do not drag, hard pull, to avoid sharp stab wounds.
1, should be extended from the bottom to the high, do not pull too tight, should be left with more than 1.50%, in order to prepare for local sinking. Taking into account the actual situation of the project, the slope from top to bottom laying order;
2, two adjacent longitudinal joints should not be in a horizontal line, should be staggered over 1m;
3, the longitudinal distance of the foot, bending at the joints should be more than 1.50M, should be located in the plane;
4, the first slope back bottom;
5. When the slope is laid, the direction of the film should be parallel to the maximum gradient line.
1 prior to the laying of geomembrane should be the civil engineering acceptance certificate.
2 geomembrane before cutting, should be accurate measurement of its related dimensions, and then according to the actual cutting, the general should not be cut according to the size of the icon, should be a serial number, detailed records on the special form.
3 laying geomembrane should strive to weld the least, in the premise of ensuring quality, try to save raw materials. At the same time also accommodate
Easy to ensure quality.
4 the overlap width between the membrane and the membrane is generally not less than 10cm, which usually makes the alignment direction parallel to the maximum gradient.
5 normally in the corner and abnormal area, should be as far as possible to shorten the length of the joint. In addition to special requirements, the slope is greater than 1:6 on the slope away from the top slope or stress concentration area within 1.5 meters, as far as possible without welding.
6 geomembrane in the laying, should avoid artificial folds, when the temperature is low, should be taut, smooth.
7 geomembrane laying is completed, should minimize walking and handling tools on the membrane surface, which can cause harm of the objects on the membrane, shall not carry it or walk on the membrane in the membrane, so as to avoid accidental injury of membrane.
Specification for Geomembrane welding
- the foundation excavation - do bottom mortar protection layer (H20-30mm)
The cutting slope, dense and smooth
The composite geomembrane and the vertical water Retaining Wall
The surface smooth, clear, the handover process
Water sealing - water pipe
The composite geomembrane laying and welding
The handover process
The welding quality inspection and repair
- two, overview of the project completion and acceptance
1, the highest design level: 0.6m.
2, waterproof construction total area of about 800 square meters.
3, ceramsite brick masonry retaining wall.
4, underwater with collapse pit.
Three, the main waterproof material
1, composite geomembrane material, specifications: 50*4m 150g/ square meters /0.5mm/150g/ square meters.
2, GB rubber seal.
The basic conditions
1, the basic design and excavation shall be carried out after the cutting slope, flat rolled or compacted processing. Disturb the soil displacement and backfill should be stratified water rolled or compacted, the thickness of each layer using 400mm.
2, remove the exposed surface has pierced the hidden base material, such as brick, stone, glass and metal debris; Vatone; branches, roots etc.. There are obstacles in the clearing site to provide the necessary construction conditions.
3, the surrounding water retaining wall, pump pit, bridge foundation, and the water pipe installation and reserved work must be finished before the construction of composite geomembrane.
Welding and laying technology
1, welding technology
1).The lap weld width: 80~100mm; plane and natural fold respectively: 5%~8%; 3%~5%; joint expansion: Scrap surplus volume: 2%~5%.
2).The hot melt welding temperature of 280~300 DEG C; 2~3m/min welding speed; the form of double bead.
3).Repair method of damaged parts, cutting the same specifications of materials, hot melt adhesive, polyethylene sealant.
4).The bead no connection imitation cloth, using mechanical suture.
5).Water sealing water tube, the GB rubber seal seal, metal bandage and antiseptic treatment.
2, Laying technology
1).Composite geomembrane laying and expansion direction, from E to W or from W to E, the length of each laying, including both sides of the retaining wall height once completed.
2).Laying sequence, from the channel axis to S, N on both sides to promote.
3).The construction procedure, first mortar layer bottom of composite geomembrane (20-30mm), and then the vertical retaining wall paste.
4).Bonding process of composite geomembrane and retaining wall. The adhesive is coated on the surface of the composite geomembrane and the retaining wall, and the drying time is about 5 minutes. The adhesive consists of asphalt emulsion paint, cement, water and mixing. Paste is completed, the water level above the drill nail, and waterproof, anti-corrosion treatment.
Shandong Yadai New Materials Co.,Ltd is one specialized supplier on waterproof materials.
Products got the approval of ISO9001, ISO14001, and some products can meet ASTM and
CE international standards.
As a public company, we mainly supply SBS Modified Bitumen waterproof Membrane, PE/PVC/EPDM/TPO
Waterproof Membrane, Waterproof Coating, etc.
Not for the best, but for the better, work and service for you esteemed customers requirmrnts.
Hope to contribute to waterproofing industry for future brilliance with you together.
Yadai takes the most advanded technology, that is , three layer round die method to manufacture the ASTM standard geomembrane liner. Due to its high mechanical performance, chemical and UV resistance, and long durability, it is widely used in the environmental protection.
1.On a regular basis or as per your request,we entrust national testing agencies to conduct quality inspections.
2.Strictly in accordance with the ISO9001-2008 international quality system standard,we monitor and manage the whole process throughout production,quality testing,and measurement to ensure product quality.
3.For quality-related construction delay or substandard construction(except for damage or losses due to customer's responsibility or irresistible natural disasters),we have refunding,replacement,and repair services.We will respond to customers' feedbacks on quality issues within 24 hours.
Packaging & Delivery
Packaging Details:Standard export Packing. Or Packed as customers' requests
Delivery Detail:For 40HC,within 7 days after receipt of L/C or deposit
Shandong Yadai New Materials Co., Ltd.
Address: No. 29 Xing'an Road, Shibei District, Shandong Province, Qingdao, Shandong, China
Contact us if you need more details on Geomembrane. We are ready to answer your questions on packaging, logistics, certification or any other aspects about HDPE、Lake. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Liner Geomembrane